Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents

How To:Activate Burnout Mode on Volkswagen MK6 Vehicles


Applicable Model/Year: 

  • MK7 GTI
  • MK7 Golf R


How To Enable:

This feature is enabled on all OTS Maps

The vehicle will need to meet the following conditions for the ECU to allow it to happen.

  • Coolant Temp Min-Max (160F - 250F)
  • Engine Oil Min-Max (160F - 250F)
  • EGT MAX (1835F)
  • Steering Wheel Angle (within 20 degrees of being completely straight)


Steps to Use:

Golf R Will need to be set to "Dyno Mode" in order to disable the rear axle.  If enabled the car will essentially just launch itself with a higher RPM than launch control would otherwise allow.

How to: Put MK7 Golf R in "Dyno Mode" (FWD)
Manual Transmission

  • Engage the parking brake
  • Enable cruise control
  • Press and hold the cruise control "
set
  • decel" button
  • Depress and hold the clutch pedal to 100%
  • Move the shifter to 1st gear
  • Depress and hold the throttle pedal to 100%
  • Release the clutch pedal
  • Continue to hold the "
set
  • decel" button for as long as you'd like to do the burnout

DSG Transmission

  • Engage the parking brake
  • Enable cruise control
  • Press and hold the cruise control "
set
  • decel" button
  • Depress and hold the brake pedal to 100%
  • Move the shifter to Sport Mode
  • Depress and hold the throttle pedal to 100%
  • Release the brake pedal
  • Continue to hold the "
set
  • decel" button for as long as you'd like to do the burnout



Things To Look Out For:


Info
iconfalse

WARNING - THESE FEATURES ARE ABUSIVE TO THE ENGINE, CLUTCH, TRANSMISSION, AXLES, TIRES, AND DIFFERENTIAL.  THE USER ACCEPTS ALL RISKS AND RESPONSIBILITIES WHEN USING THIS FEATURE



Related Articles:

COBB Custom Features: Launch Control on MK7 Vehicles

COBB Custom Features: How to Use Flat Foot Shift on MK7 Vehicles

Widget Connectorurlhttps://www.youtube.com/watch?v=sdFuw5kcItMVolkswagen Mk6




Customer Support

support@cobbtuning.com

Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)

866.922.3059