Part Number – Part Name
821650 - Subaru Turbo Blanket (EJ Engines)
Vehicle Coverage
[placeholder]
Congratulations on your purchase of the COBB Tuning Turbo Blanket! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
IMPORTANT! Installing this kit will require custom tuning or utilizing an appropriate Stage Power Package map if you have a matching mechanical configuration. Please consult with COBB or an authorized ProTuner in your area if you have any questions!
Table of Contents
| Table of Contents |
|---|
Parts List
- Turbo Blanket
- Safety Wire
- (2) Springs
Tools Needed
Sockets
3/8"
Hand Tools
Stock Component Removal
- Remove your intercooler
| Insert excerpt | ||||||
|---|---|---|---|---|---|---|
|
Turbo Blanket Installation
- The cut-out shown at the top of the blanket should match up with the wastegate arm area of the turbo. Go ahead and attach one end of the wire to the rivet shown to be on the upper right side. It should be tight enough not to fall off, but over-tightening may cause the wire to break.
- Start working the blanket around the exhaust housing of the turbocharger starting by working it under the wastegate arm.
- Now tuck the other side down around the turbo and under the bracket.
Important Notes
While not flammable on their own, if any sort of flammable chemical gets into the fiber of the turbo blanket, it may be possible for a fire to occur. It is recommended to replace the turbo blanket if ANY flammable chemicals, liquids, or materials get on the blanket.
Links
| Insert excerpt | ||||||
|---|---|---|---|---|---|---|
|