| Table of Contents |
|---|
How To: Datalog
Accessport V3
Steps to Use:
- With the Accessport installed navigate to the "gauges" menu.
- If it's the first time you've gone to the gauge menu of the Accessport it will prompt you to ask how many monitors you want to display. The selection can be updated later in the Gauge Setup menu.
- From the main gauge display, you can simply hit the center button on the Accessport in order to start logging. If you haven't pre-selected anything there are default parameters that will be logged which are typically the ones COBB Customer Support will ask you for. Note that the Accessport will show "logging" at the top of the screen and at the bottom will let you know the logging rate.
- In order to stop logging, you'll need to hit the center button on the Accessport again.
Related Articles
How to Change Datalog Monitors - explains how to go through the process in order to change datalog monitors.
How to transfer maps and datalogs using Accessport Manager - covers migrating maps and datalogs to your computer
How to Change/Reset Displayed Gauges - explains the process for changing the displayed gauges.Widget Connector url https://www.youtube.com/watch?v=LlPnHnwAoEc
Accessport V2
Steps to Use:
- With the Accessport installed navigate to the "Monitor" menu.
- From there select "Data Log" in order to capture engine data.
- In order to stop logging, you'll need to hit the center button on the Accessport again.
Available Adjustments and How to Make Them:
Customer Support
Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)
866.922.3059