...
Panel | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
In the datalog presets we offer a CanGatewayTroubleshoot preset in order to troubleshoot any DTC’s. two preset datalog lists specifically for CAN Gateway Flex Fuel.
If you’re not sure your car is safe to run or drive with the DTC you’re getting, reach out to our customer support team .and chat with them first! |
...
COBB8
Expand | ||
---|---|---|
| ||
Gateway Module Not Detected |
...
Expand | ||
---|---|---|
| ||
Gateway firmware is the incorrect version. |
Expand | ||
---|---|---|
| ||
This will come up if the firmware on the Gateway module itself is out of date, or if the map version is too old compared to the gateway. |
Expand | ||
---|---|---|
| ||
To avoid unwanted issues if (for example) you were on higher ethanol content and you lost communication with the gateway, you will see a few other DTCs for things as well as their failsafes will enable.
|
Expand | ||
---|---|---|
| ||
If there is an important update to the Gateway firmware or COBB software and maps that is not backwards compatible, you will see this message. The best resolution is to update your gateway and go to the most recent OTS maps, if you have a Protuner you may need to reach out to them to have your map resaved with the most recent changes. |
...
COBBB
Expand | ||
---|---|---|
| ||
CAN Gateway General Packet Error |
Expand | ||
---|---|---|
| ||
The gateway is getting invalid information from one of the sensors. |
Expand | ||
---|---|---|
| ||
To avoid unwanted issues if (for example) you were on higher ethanol content and you lost communication with the gateway, you will see a few other DTCs for things as well as their failsafes will enable.
|
Expand | ||
---|---|---|
| ||
Gateway is receiving or sending invalid information. Reach out to customer support for next steps for troubleshooting. |
...
COBBC
Expand | ||
---|---|---|
| ||
Gateway Custom Sensor Error |
Expand | ||
---|---|---|
| ||
If you have a custom sensor enabled and it is throwing an error. Or a general error that impacts all sensors has happened |
Expand | ||
---|---|---|
| ||
|
Expand | ||
---|---|---|
| ||
This can be caused by having a fautly sensor/a sensor that is not correct for your calibration, loose connection between the gateway and sensor, or by something in the map being set up incorrectly. Double-check your connections and that your sensor is correct and plugged in, then reach out to COBB or your custom tuner for additional assistance.
|
...
COBBD
Expand | ||
---|---|---|
| ||
Gateway Inconsistent Sensor |
Expand | ||
---|---|---|
| ||
Information for a given sensor is being received inconsistently. |
Expand | ||
---|---|---|
| ||
To avoid unwanted issues if (for example) you were on higher ethanol content and you lost communication with the gateway, you will see a few other DTCs for things as well as their failsafes will enable.
|
Expand | ||
---|---|---|
| ||
This will be thrown if one of the sensor cables isn’t connected properly or is potentially bad. |
...
Expand | ||
---|---|---|
| ||
Gateway Ethanol Sensor Error |
Expand | ||
---|---|---|
| ||
The gateway is seeing an issue with the Ethanol content sensor. |
Expand | ||
---|---|---|
| ||
|
Expand | ||
---|---|---|
| ||
Monitors
|
...