Table of Contents |
---|
How To: Cobb Custom Features: Valet Mode
Applicable Model/Year:
- Raptor 2017 - 2020
- F-150 Limited HO 2019 - 2020
- F-150 3.5L 2018-2020
How To Enable:
This feature comes pre-enabled on all applicable models. If you are finding this doesn't work correctly ensure you are on the most recent firmware and map updates.
Steps to Use:
Unlike other vehicles where you'll need to flash an entire valet map to your car, we're now offering it as a switchable option on the Accessport!
- Go to the Tune menu on the main screen of your Accessport.
- Select Adjustments out of that menu.
- From there you'll select Valet Mode.
- From there select "1" if you want it to be enabled or "0" to be disabled.
- Select "Save" and wait for the changes to be applied to the ECU.
- Make sure to allow the truck time turned completely off after you're done before you re-enable it.