Subaru Factory Monitor Descriptions For Accesstuner And V3 Accessport

January 2021

Introduction

This document provides descriptions of each of the data monitors available to view and log in the current Accesstuner software and V3 Accessport firmware. Not all monitors are available for all vehicles due to differences in vehicle hardware and/or engine control unit (ECU) capabilities. Some monitors are only available in the latest ECU version (strategy) for a given vehicle.

For help with monitors specific to the COBB Custom Features, please see the separate COBB custom monitor guide.

Glossary of Acronyms

• • A/F = Air/Fuel
    
    
  • AT = Automatic Transmission
    
    
  • AVCS = Subaru's Active Valve Control System (i.e. variable valve timing)
    
    
  • CL = Closed Loop fueling
    
    
  • CVT = Continuously Variable Transmission
    
    
  • DAM = Dynamic Advance Multiplier
    
    
  • DIT = Subaru's "Direct Injection Turbo" motor (14-18 FXT, 15+ WRX, 19+ Ascent)
    
    
  • EQ Ratio = Equivalence Ratio
    
    
  • ECU = Engine Control Unit
    
    
  • FXT = Forester XT model
    
    
  • LGT = Legacy GT model
    
    
  • MAF = Mass Airflow
    
    
  • MT = Manual Transmission
    
    
  • OL = Open Loop fueling
    
    
  • RPM = Revolutions Per Minute (referring to engine speed)
    
    
  • TGV = Tumble Generator Valve
    
    
  • TPS = Throttle Position Sensor (or more generically referring to throttle position)
    
    
  • VDC = Vehicle Dynamics Control
    
    
  • VSS = Vehicle Speed Sensor (or more generically referring to vehicle speed)

...

AF Correction 3 (AF Correction 3) -> Short-term (immediate) fueling correction in closed loop based on input from the rear oxygen sensor. This is a percentage correction of the injector pulse widthclosed loop fueling target. Positive values indicate fuel is being added as a result of the correction. Negative values indicate fuel is being removed.

...