COBB Tuning BPV Installation Instructions

724665 – Mazdaspeed LF BPV

2004-2007 Mazda6 MPS
2004-2007 Mazdaspeed Atenza
2006-2007 Mazdaspeed6

2007-2012 Mazda3 MPS
2007-2012 Mazdaspeed Axela
2007-2013 Mazdaspeed3

Congratulations on your purchase of the COBB Tuning BPV! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.

Parts List

BPV
6mm COBB Vacuum Hose
Zip Ties
Paper Gasket

Tools Needed

Sockets

3/8"

Hand Tools

Needlenose pliers

Stock BPV Removal

Remove the two 10mm bolts holding the intercooler cover in place.
Remove the hose clamp holding the manifold reference line in place and remove the line.
Undo the hose clamp holding the recirculation tube in place.
Remove the two 12mm bolts holding the BPV in place

COBB BPV Installation

Slide the gasket into place on the BPV and install the bolts hand tight.
Torque down the two bolts holding the BPV in place.
Install the manifold reference line
Note
If you need to adjust the top fitting, re-torque it to 60 ftin-lbs
Install the hose clamps onto the vacuum line.
Install the recirculation hose and clamp it in place.
Reinstall the intercooler cover and the two 10mm bolts.
You're all done! Go out and enjoy.