Part Number – Part Name

Subaru WRX 2015 - 2020

[placeholder]

Congratulations on your purchase of the COBB Tuning VA WRX Top Mount Intercooler! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.

Table of Contents

Parts List

• COBB TMIC Core Assembly
• COBB Thrust Tunnel Back Assembly
• COBB Thrust Tunnel Side Panels
• DIT WRX Bracket Mount
• DIT WRX Power Steering Computer Relocation Bracket
• Silicone TMIC Coupler
• 2.75" - 2.5" Coupler
• (2) Prothane Bushings
• (1) Bushing Insert Pin
• 3' Rubber Flap Seal
• 842400-HW Hardware Kit
  • M12 x 1.75mm nylon lock not
  • M12 x 70mm Hex Head Bolt
  • (15) SS Black Oxide Button Head Bolt
  • (2) Flanged Hex Nut 6mm
  • (2) #44 Hose Clamps

Tools Needed

Sockets

3/8"

• 3/8" ratchet

• 3/8" 12" extension

• 3/8" 6" extension
  

• 3/8" Socket Swivel

• 3/8" 7mm socket

• 3/8" 10mm socket

• 3/8" 12mm socket 
  

• 3/8" 14mm socket

• 3/8" 17mm socket
• 3/8" 18mm socket

Hand Tools

• Phillips head screwdriver
• Flathead screwdriver
• Trim removal tool

• Pick

Wrenches

• 17mm combination wrench
• 18mm combination wrench

Section 1

Section 2

Section 3

Section 4

Section 5

Links

MAP Notes

Helps to figure out which map you should be on given the parts installed to your car 

Links for related parts

Contact Us:

COBB Customer Support

Web Support and Tech Articles: COBB Tuning Customer Support Center

Email: support@cobbtuning.com

Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)

866.922.3059

return to www.cobbtuning.com