Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Part Number - Part Name

Vehicle Coverage

Congratulations on your purchase of the COBB Tuning Air Oil Separator for EcoBoost Mustang! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.

Parts List

 AOS Can Assembly

 Engine Spacer Plate

 AOS Bracket for EBM

 (4') 5/8" Emissions LIne

 (1') 1/2" Fuel Evap Hose

 (2) -10 ORB barb fittings with o-ring

 -6 ORB barb fitting with o-ring

 (1) 5/8" Constant Tension Spring Clamp

 (4) 25/32 Constant Tension Spring Clamp

 (4) 15/16" Constant Tension Spring Clamp

 (2) 1/2" to 3/8" barbed reducer

 M6 x 1.0 x 16mm Hex Bolt

 M6 x 1.0 x 30mm Hex Bolt

 3/4" Aluminum Spacer

 M6 x 1.0 Nylon Locking Nut

 (3) M6 Stainless Washers

 (8) M6 x 1.0 x 40mm Hex Bolt

 Breather Plate Gasket

 (3) M4 x 1.0 x 8mm Button Head Screws

 O-Ring Lube

Tools Needed

Sockets

3/8"

  • 3/8" ratchet

  • 3/8" 12" extension

  • 3/8" 6" extension

  • 3/8" Socket Swivel

  • 3/8" 7mm socket

  • 3/8" 8mm socket

  • 3/8" 10mm socket

  • 3/8" 12mm socket

  • 3/8" 13mm socket

  • 3/8" 10mm deep socket

  • 3/8" 4mm Allen Socket

Hand Tools

  • Phillips head screwdriver

  • Trim removal tool

  • Pick

Wrenches

  • 10mm combination wrench

Section 1


Section 2


Section 3


Section 4


Section 5


CARB Sticker Application

(Where Applicable)

  1. Apply the supplied CARB sticker in a clear, easy to find location.  Typically underhood, or on the radiator core support.

Links

MAP Notes

Helps to figure out which map you should be on given the parts installed to your car 

Links for related parts

  • No labels