Porsche 95B Macan Map Notes

Supported Vehicles:


Porsche Macan 

  • 2014 - 2018 Porsche Macan S (95B) WM 
  • 2017 - 2018 Porsche Macan GTS (95B) WM 
  • 2014 - 2018 Porsche Macan Turbo (95B) WM
  • 2017 - 2018 Porsche Macan Turbo Performance Package (95B) WM
  • 2017 - 2018 Porsche Macan 2.0L (95B) USDM

Currently Unsupported Porsche Macan Models

  • 2014 - 2018 Macan S Diesel (95B) 

Map Revision:

Porsche Macan Base 2.0L (95B) USDMPorsche Macan S (95B) WMPorsche Macan GTS (95B) WMPorsche Macan Turbo (95B) WMPorsche Macan Turbo Performance Package (95B) WM
  • Stage0 v209
  • Stage1 v209
  • OEM+ v208 (for Macan S ONLY)
  • Stage0 v208
  • Stage1 v208
  • Stage2 v208
  • Stage0 v208
  • Stage1 v208 
  • Stage0 v208
  • Stage1 v208
  • Stage2 v208
  • Stage0 v208
  • Stage1 v208




Required Accessport Firmware:

Map Availability: 



Fuel Requirements:

Each map lists the minimum required octane. A higher octane fuel can be used safely on a map designed for lower octane. DO NOT use maps designed for higher octane with lower octane fuels. Top Tier gasoline should be used where available.

  • Maps designated with "ACN91 OCT or 93 RON" are for use with 91 octane fuel found in Arizona, California, and Nevada, Canadian 94 Octane and 94 Octane with 0% ethanol, 93 RON fuel or better.
  • Maps designated with "91 OCT or 95 RON " are for use with 91 and 92 octane/95 RON fuel or better.
  • Maps designated with "93 OCT or 98 RON" are for use with 93 octane/98 RON fuel or better.
    • 94 octane with 0% Ethanol should run the ACN91 Map.
  • Maps designated with "100 OCT or 102 RON" are for use with 100 octane/102 RON fuel or better.



Running 0% Ethanol Fuels

These maps are designed for E10 fuel (fuel with 10% ethanol content). For those who only have access to E0 fuel (fuel with 0% ethanol) it is recommended to use the "91" and "ACN91" octane versions of the maps and datalog the car to ensure your fuel is performing to the necessary level. This is especially important for those using Canadian 94 octane E0 fuel. 











Revision Notes:

Version

Notes

V209

Maps updated for various table fixes for Macan Base

V208

Maps description fixes

V207

Maps updated for various monitor fixes

V206

New Fuel Pressure monitors for the Macan S/GTS/Turbo

V205

Addition of Macan Turbo Performance Package support, Release of Stage 2 and Stage3 Maps for Macan S/Turbo.  Macan S/GTS/Turbo Stage1 Maps have been further refined to provide smoother low to high load transitions and better all around driveability.  Macan 2.0L is still on v203.

V203

Fixed rare issue in the Macan 2.0L vehicles where an overboost code would appear. Macan S/GTS/Turbo are still on V202.

V202

Fixed an issue with V201 that would cause some GTS vehicles to go into limp mode. S and Turbo maps are unchanged from V201.   Initial Launch Calibrations for Macan Base 2.0L.

V201

Revised tuning strategy for S, GTS, and Turbo. Increased output in all models. 

V102

Full Fix deployed for intermittent driveability issues encountered only on the Macan Turbo.  Macan S and GTS set to V102 for conformity.

V101

Temporary beta revisions added for Macan Turbo,  Macan S and GTS set to V101 for conformity.

V100

Initial Release Calibration. Adjusted ignition timing, airflow limits, torque limits, and fuel as well as other tables that help maintain drivability and increase performance all while maintaining reliability.