COBB Custom Features: Valet Mode for Ford Trucks

How To:  Cobb Custom Features: Valet Mode

Applicable Model/Year: 

  • Gen2 Raptor 2017 - 2020
  • Gen3 Raptor 2021 - 2022
  • F-150 Limited HO 2019 - 2020
  • F-150 3.5L 2017-2020
  • F-150 3.5L/Tremor 2021 - 2022
  • F-150 2.7L 2018-2020
  • Maverick 2.0L T 2022
  • Explorer ST 2020-2023


How To Enable:

This feature comes pre-enabled on all applicable models.  If you are finding this doesn't work correctly ensure you are on the most recent firmware and map updates.


Steps to Use:

Unlike other vehicles where you'll need to flash an entire valet map to your car, we're now offering it as a switchable option on the Accessport!

  1. Go to the Tune menu on the main screen of your Accessport.




  2. Select Adjustments out of that menu.




  3. From there you'll select Valet Mode.




  4. From there select "1" if you want it to be enabled or "0" to be disabled.

        


  5. Select "Save" and wait for the changes to be applied to the ECU.

  6. Make sure to allow the truck time turned completely off after you're done before you re-enable it.



Copyright 2024 © COBB Tuning Products LLC. All Rights Reserved. | www.cobbtuning.com