715665 - 1" Universal LF BPV

715665 – 1" Universal LF BPV

Congratulations on your purchase of the COBB Tuning 1" Universal LF BPV! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.

Table of Contents

Parts List

  • 6mm Silicon Hose
  • (3) Zip Ties
  • (2) Stickers

Tools Needed

Hand Tools

  • Phillips head screwdriver
  • Flathead screwdriver
  • Needlenose pliers

BPV Installation

  1. Start out by removing the Original BPV by unscrewing hose clamps or removing the factory spring clamps 

  2. Insert the bpv nose first into the recirculation tube, leaving the clamp loose for now to allow for movement.  Make sure it goes all the way in.


  3. Now insert the lower portion and tighten down both hose clamps.

  4. Attach the factory boost reference or run a new one using the provided silicon line.

    If you need to adjust the top bolt, re-torque to 60 in/lbs

  5. If desired clamp down the hose using a zip tie.

  6. Place your CARB sticker somewhere permanent and easily viewable by CARB officials (We recommend the radiator support).  Make sure to clean the surface first to ensure the sticker sticks properly.

  7. You're all good!  Go out and enjoy!


Contact Us:

COBB Customer Support

Web Support and Tech Articles: COBB Tuning Customer Support Center

Email: support@cobbtuning.com

Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)


return to www.cobbtuning.com