How To:  Cobb Custom Features: Launch Control on Subaru Vehicles

Applicable Model/Year: 

• All Subaru Vehicles Manual Transmission Only

How To Enable:

This feature comes pre enabled on all applicable models.  If you are finding this doesn't work correctly ensure you are on the most recent firmware and map updates.

Steps to Use:

1. Bring vehicle to a complete stop
2. Fully depress the clutch pedal.
3. Put the transmission in 1st gear
4. Press the accelerator pedal to the floor quickly, vehicle will now hold at the specified RPM level.
5. Release the clutch, and go!

Available Adjustments,When And Why To Adjust :

Shifting RPM LImit

1. Go to "Tune" Menu
2. Select "Adjustments
3. Select "Change LC Limit" 
4. Adjust to whatever RPM desired and then click the center button to save those changes.

Things To Look Out For:

WARNING - USE OF THIS SYSTEM IS VERY ABUSIVE AND WEARING ON THE VEHICLES ENGINE, CLUTCH, TRANSMISSION, AXLES, DIFFERENTIAL AND TIRES.  THE USER ACCEPTS ALL RISK AND RESPONSIBILITIES WHEN USING THIS FEATURE. 

Related Articles:

How To Update Your AP's Firmware