Tech Bulletin - Focus/Fiesta ST CCF Gen2 - VE Compensation (VCT) Tables

Date: 4/2/18
By: Mike McGinnis

Vehicles affected:

• Ford Focus and Fiesta ST

Software affected:

• 2.0.0.0-15958 and newer

Firmware affected:

• not applicable

As part of the 2.0.0.0-15958 software update, VE Compensation (VCT Exhaust)" and "VE Compensation (VCT Intake)" tables have been altered to correct an error in X axis scaling.

When using Ford tuning software v2.0.0.0-15958 and higher, opening a calibration saved in older software will cause displayed X axis data in these two tables to change. This will not alter engine behavior. The only change is the X axis values will now be displayed correctly.

Opening and re-saving a calibration will not alter vehicle operation, so no further action is required. We merely wish to make you aware of this display change.

If you do wish to tune these tables, we suggest importing default values using the "Import Tables From Stock" feature of our software as a starting point.