Auto Shift Point Tuning Guide

The TCM (Transmission control module) for the GTR contains a complete instruction set for transmission function. These instructions include great number of tables that influence the up and downshift points for the transmission when run in "auto" mode. The full function and interactions of these tables is not fully understood. Therefore, these tables are labeled as BETA. This guide is meant as a starting point for tuning. Your tuning application may be unique and require testing to verify. However, because these tables are not fully defined, there is an opportunity for talented calibrators to create new and valuable intellectual property.

The most common use of autoshift is for high HP cars where a computer instigated shift routine is more reliable than a driver. Under these circumstances a higher than "stock" shift point is desired. Changing two sets of tables will permit higher than stock auto shifting in both "race" and "normal" transmission modes. The most simple way to do this is to increase the shift points at high throttle for tables "Auto Upshift Group A - xx Gear" in addition to "Auto Upshift Group B - xx Gear – 1, 2 and 3". Shift points are indicated in mph and must be translated to RPM for each gear.

For example:

This is the Upshift table for gear 2. When translated from mph to RPM it looks like this:

Throttle	0	9	11	18	25	38	50	75	88	100
MPH	14	14	16	22	29	39	47	57	60	63
RPM	1521	1521	1739	2391	3151	4238	5107	6194	6520	6846

The scalar to change speed to RPM in second gear is: 0.009203

So if you desire to increase the Upshift point to 7200 RPM the new indicated MPH in the table is:

7200*0.009203 = 66.2 mph or 66 mph in the table.

A completed table with the 2 to 3 upshift changed to 7200 would look like this:

The approximate scalars for each gear are:

Gear	Scalar
1	0.005253
2	0.009203
3	0.013725
4	0.017548
5	0.022085
6	0.027706

In order to change shift points in auto mode we advise that users change Upshift points in a coordinated manner in both "Auto Upshift Group A - xx Gear" as well as all "Auto Upshift Group B - xx Gear – 1, 2 and 3" tables. A sample TCM (KJ10B) set up to Upshift at 7200 rpm in Auto, Race and Normal Modes can be found here.

For example = to upshift at 7200, 7500, or 7800 in each gear the max mph shift points are:

Gear	Scalar	7200 rpm	7500 rpm	7800 rpm
1 to 2	0.005253	38	39	41
2 to 3	0.009203	66	69	72
3 to 4	0.013725	99	103	107
4 to 5	0.017548	126	132	137
5 to 6	0.022085	159	159	159

With the current tuning approach the maximum 5 to 6 gear change is limited to 158 mph.

Browser not supported