Subaru Vehicles: How to tell what features are enabled on your map

Owned by Brandyn Mowat
Last updated: Nov 02, 2022 by Michael Sessions
1 min read


Table of Contents




Applicable Accessports: 

  • AP3-SUB-001
  • AP3-SUB-002
  • AP3-SUB-003
  • AP3-SUB-004
  • AP3-SUB-005
  • AP3-SUB-006
  • AP3-AU-SUB-003
  • AP3-AU-SUB-004



Minimum Firmware Version:

1.7.4.2-21409



Steps to Use:

  1. From the main menu of your Accessport, navigate to the Tune Menu.

  2. Select "Show Custom Features"




  3. It will now display a list of the enabled custom features found in the map.

        


FeatureOptions
Flex Fuel
  • Enabled V1 (discontinued)
  • Disabled
Launch Control
  • Std v1
Flat-Foot-Shift
  • Std v1
Realtime Version
  • v0
  • v1
Logging Type
  • K-Line
  • CAN (v1)



  • Not all features are available for every vehicle.
  • Launch Control and Flat-Foot-Shift can be disabled by setting the rpm limit to an unattainable level, thus it is possible for these features to show up as enabled but you won't be able to utilise them until you adjust the launch/shift limit to an appropriate value.





Related Articles




Definitions




Links


Contact Us:

COBB Customer Support

Web Support and Tech Articles: COBB Tuning Customer Support Center

Email: support@cobbtuning.com

Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)

866.922.3059


return to www.cobbtuning.com


Copyright 2023 © COBB Tuning Products LLC. All Rights Reserved. | www.cobbtuning.com