BMW N54 & N55 Monitor List

AP-BMW-001 & AP-BMW-002 Data Monitors

BMW N54 AP-BMW-001 Gauges and Data Monitors

**Bolded Monitors indicate default data log parameter

Accel Ped. Pos. - (%)
Actual Load - (Load)
Baro Pressure - (PSI, kPA, kPA)
Battery Voltage - (V)
Boost - (PSI, kPA, kPA)
Boost Mean Abs - (PSI, kPA, kPA)
Boost Set Limit - (PSI, kPA, kPA)
Boost Setpoint Factor - (Factor)
Charge Air Temp. - (°F, °C, °C) (N54)
Cyl1 Timing Cor
Cyl2 Timing Cor
Cyl3 Timing Cor
Cyl4 Timing Cor
Cyl5 Timing Cor
Cyl6 Timing Cor
ECT - Engine Coolant Temperature (°F, °C, °C)
Fuel HPFP - (PSI, kPA, kPA)
Fuel HPFP (Req.) - (PSI, kPA, kPA)
Fuel LPFP - (PSI, kPA, kPA)
Fuel LPFP (Req.) - (PSI, kPA, kPA)
Fuel Mode - (Mode)
Intake Manifold Temp (N55)
IPW Cyl 1 - (%)
IPW Cyl 2 - (%)
IPW Cyl 3 - (%)
IPW Cyl 4 - (%)
IPW Cyl 5 - (%)
IPW Cyl 6 - (%)
Knock Volt Cyl. 1 - (V)
Knock Volt Cyl. 2 - (V)
Knock Volt Cyl. 3 - (V)
Knock Volt Cyl. 4 - (V)
Knock Volt Cyl. 5 - (V)
Knock Volt Cyl. 6 - (V)
Lambda (Bank1) - (AFR, λ, λ)
Lambda (Bank2) - (AFR, λ, λ)
Lambda Req. (Bank1) - (AFR, λ, λ)
Lambda Req. (Bank2) - (AFR, λ, λ)
Load Requested - (Load)
LTFT (Bank 1) - (%)
LTFT (Bank 2) - (%)
MAF - (g/s)
MAP - (?)
Oil Temp. - (°F, °C, °C)
Req. Boost Abs. - (AFR, λ, λ)
Req. Boost Delta - (AFR, λ, λ)
RPM - (RPM)
STFT (Bank 1) - (%)
STFT (Bank 2) - (%)
Timing Cor. (BAT/ECT) - (°)
Timing Cyl. 1 - (°)
Timing Cyl. 2 - (°)
Timing Cyl. 3 - (°)
Timing Cyl. 4 - (°)
Timing Cyl. 5 - (°)
Timing Cyl. 6 - (°)
Torque Limit Active - (?)
Torque Limit Modifier - (?)
Torque Output - (%)
Torque Requested - (%)
TPS Act. - (%)
VANOS Exh. Act. (CRK) - (CA)
VANOS Exh. Req. (CRK) - (CA)
VANOS In. Act. (CRK) - (CA)
VANOS In. Req. (CRK) - (CA)
Vehicle Speed - (mph, kph, kph)
WGDC After PID (CRK) - (%)
WGDC Bank 1 - (%)
WGDC Bank 2 - (%)
WGDC Base Value - (%)

N55: 2011 BMW 135i, 335i Data Monitors

**Bolded Monitors indicate default data log parameter

Battery Voltage (V)
Vehicle Speed
MAF
RPM
Pedal Position
TPS Actual
TPS Requested
Baro Pressure
Boost Abs Post TB
Torque Output
ECT
Oil Temp
Ambient Temp
Charge Air Temp
Lambda
STFT
LTFT
O2 Sen Pre Cat (V)
O2 Sen Post Cat (V)
Boost Rel.
Boost Abs. TB. (Tuning)
Boost Req. Abs. TB. (Tuning)
Boost Over Shoot Factor
Boost Set Limit
Boost Ratio (TPS)
Load Act.
Load Req.
Load Max
MAF Req. (WGDC)
MAF Req.
WGDC
WGDC Base Value
WGDC After PID
Torque Request
Timing Cor. Cyl 1
Timing Cor. Cyl 2
Timing Cor. Cyl 3
Timing Cor. Cyl 4
Timing Cor. Cyl 5
Timing Cor. Cyl 6
Timing Cyl 1
Timing Cyl 2
Timing Cyl 3
Timing Cyl 4
Timing Cyl 5
Timing Cyl 6