Congratulations on your purchase of the COBB Tuning Hard Pipe Kit! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
Parts List
Tools Needed
Begin by removing the mid under-tray (fabric). There are (8) Torx 27 screws and (4) push pins.
Remove front under tray (plastic). There are (6) Torx 27 screws and (7) additional screws. There is one screw in each wheel well that will need to be removed.
(Where Applicable)
Apply the supplied CARB sticker in a clear, easy to find location. Typically underhood, or on the radiator core support.
COBB Product Install Instructions for Focus RS
Main Installation Instruction Repository for Focus RS Parts
COBB Product Install Instructions for Focus RS
Link to Focus RS Map Notes to see what map you should be on given the parts you've added