7P1100 - High Flow Filter for 981 Cayman / Boxster
Vehicle Coverage
Congratulations on your purchase of the COBB Tuning High Flow Filter for 981 Cayman / Boxster! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
IMPORTANT! Installing this kit will require custom tuning or utilizing an appropriate Stage Power Package map if you have a matching mechanical configuration. Please consult with COBB or an authorized ProTuner in your area if you have any questions!
Remove the carpeted panel on either side by simply pulling outward firmly.
Throughout the interior removal keep an eye on the small plastic cones. They are critical for re-fitting the panels and have a tendency to get left behind in the holes or fall behind interior panels. |
On either side near the trunk rail weather-stripping gently peel it back in order to get a trim tool behind it and remove the trim.
In addition to the cones, there are some small plastic bumpers to keep panels from rattling. Make sure to keep an eye on these! |
Using a 1/4" socket, screw in the new filters making sure to line up the small nubs with the holes on the air filter housing.
Make sure to use the provided hardware with the filters! They are a different thread pitch and could cause damage to the filter if you use the OEM hardware. |