3C1600 – Nissan Gateway LHD Harness and Bracket
2008 - 2018 GTR LHD
Congratulations on your purchase of the COBB Tuning Nissan Gateway LHD Harness and Bracket Kit! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
IMPORTANT! Installing this kit will require custom tuning or utilizing an appropriate Stage Power Package map if you have a matching mechanical configuration. Please consult with COBB or an authorized ProTuner in your area if you have any questions!
3/8" ratchet
3/8" 10mm deep socket
Screw down your gateway using the two provided 4mm Allen bolts and add the CAN signal harness to the port marked "CAN IN" and screw it down firmly by hand.
These connectors are keyed and will not plug in to a port it is not designed for or if it is at the incorrect angle, so if it doesn't fit, don't force it, make sure you have the correct harness and that it is at the correct angle before screwing it down. |