Applicable Model/Year:
Volkswagen MK7 GTI DSG 2012 - 2017
Volkswagen MK7 Golf R DSG 2015 - 2017
To perform the various functions the menu can be accessed in the following way.
From the main menu select Troubleshooting
Then go into TCM Service
Select one of the desired functions
Most functions will require you to perform the Default Setting of DSG option afterwards. If this is not done you will see a DTC (P175F/29E9). Flashing the module will cause it to go away temporarily but it will return after the vehicle is started. If you get this DTC simply run the Default Setting of DSG function and it should go away.
List of Available Functions
Clear Clutch Behavior (Learned)
Clear Clutch One Saved Data
Clear Clutch Two Saved Data
Clear Gear Selector Information
Clear start/stop processes count
Clutch Touchpoint Calibration
Default Setting of DSG - If you run any other functions you should run this afterwards
Initialize Clutch Fast Learn
Reset CAN Info to Default
Reset Selector Position Use
These are all factory service procedures that would otherwise be performed on your dsg when visiting the dealership for varying maintenance procedures. For most functions it is necessary to run the Default Setting of DSG function afterwards. For more information on what these do and when to use them please refer to your factory service manual.