Congratulations on your purchase of the COBB Tuning Ford Raptor SF Intake! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
IMPORTANT! Installing this kit will require custom tuning or utilizing an appropriate Stage Power Package map if you have a matching mechanical configuration. Please consult with COBB or an authorized ProTuner in your area if you have any questions!
At this time if you decide to you can easily remove the swirl generators found in the two intake tubes. The large one seems to pull out easily by hand while the smaller one may require a screwdriver to pull free. While we cannot guarantee this will have no impact on your vehicle, we have found it only to contribute to a reduction in intake noise. |
Place two of the remaining small hose clamps on the points where the filter sticks out of the airbox lid.
If installing the Carbon Intake you'll want to swap out the pre-installed silver clamps for the provided Black ones. |
Customer Support
COBB Tuning Customer Support Center
Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)
866.922.3059