Fiesta ST 2014 - 2019
Congratulations on your purchase of the COBB Tuning Focus Cable Bushing! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
3/8" ratchet
3/8" 10mm socket
3/8" 12" extension
3/8" 6" extension
pull away from the bracket on the ribbed portion of the cables to free them from the bracket itself.
Over time these connections get all sorts of dirt and grime in them so it may be necessary to wiggle them a little or even try to clean them out carefully to more easily remove the cables |
Line up the bushings with the unlabeled side towards the bracket.
Make sure these are lined up before going on or you can cause damage to the bushings themselves. |
Using a 12mm and 13mm wrench, tighten the bolt slowly to pull the bushings in to place. Once there is no visible space between the bushing and bracket you're done!
Make sure not to overtighten as it is possible to crack and damage the bushings |
Once finished up everything can be reinstalled in the reverse order of removal.
It may be worthwile to take a few seconds to adjust the shifter cable to ensure everything is within factory spec. |
COBB Product Install Instructions for Fiesta ST
Main installation page group for Ford Fiesta ST
Customer Support
COBB Tuning Customer Support Center
Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)
866.922.3059