352010 – Mitsubishi Evo X Fuel Pump Holder
2008 - 2015 Mitsubish Evolution X
Congratulations on your purchase of the COBB Tuning Fuel Pump Holder! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
IMPORTANT! Installing this kit will require custom tuning as well as additional components. Please consult with COBB or an authorized ProTuner in your area if you have any questions!
This may differ depending on your setup, make sure to talk to your tuner before doing this modification as it will require other modifications to the car as well as a custom calibration to drive and operate safely.
3/8" ratchet
3/8" 8mm socket
3/8" 12" extension
3/8" 6" extension
Pick
Needlenose pliers
These next steps may vary slightly depending on the manufacturer of your pump, for appropriate specific instructions refer to the manufacturer of your pump.