752750 - Mitsubishi 3-Port Boost Control Solenoid (EBCS)
Mitsubishi Evolution X GSR, MR, SST, FE 2008-2015
Mitsubishi Lancer Ralliart AT USDM 2009-2015
Congratulations on your purchase of the COBB Tuning 3 Port Electronic Boost Control Solenoid! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
IMPORTANT! Installing this kit will require custom tuning or utilizing an appropriate Stage Power Package map if you have a matching mechanical configuration. Please consult with COBB or an authorized ProTuner in your area if you have any questions!
3/8" ratchet
3/8" 10mm socket
Needlenose pliers
When installed with a COBB NexGen Stage3 map, this product is covered under CARB EO D-660-145 For additional information on CARB EO options for your Mitsubishi, check out our page CARB EO numbers for COBB Mitsubishi Products |
Install the supplied CARB sticker on an easily viewable space that won't be susceptible to large amounts of heat. We recommend on the radiator core support, or the underside of the hood.