701550 – Ford Fiesta ST Hard Pipe Kit
Fiesta ST 2014-2019
Congratulations on your purchase of the COBB Tuning Fiesta ST Hard Pipe Kit! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
IMPORTANT! Installing this kit will require custom tuning or utilizing an appropriate Stage Power Package map if you have a matching mechanical configuration. Please consult with COBB or an authorized ProTuner in your area if you have any questions!
3/8" ratchet
3/8" 8mm socket
3/8" T25 Torx Bit
3/8" T30 Torx Socket
3/8" 12" extension
3/8" 6" extension
3/8" Socket Swivel
Install the aluminum bushing spacers into the pipe, and using your 6mmx25mm bolts, install the turbo charge pipe to the block. The order in which these are installed is Grommet - Aluminum Spacer (Flat area facing away from the car) - Bolt
COBB Product Install Instructions for Fiesta ST
Main Installation Instruction Repository for Fiesta Parts
Link to Fiesta Map Notes to see what map you should be on given the parts you've added