Applicable Model/Year: 


How To Use Launch Control

  1. Begin driving in any gear

  2. Depress and hold the throttle pedal to100%

  3. As you approach redline, engage the clutch but keep the throttle pedal at 100%

  4. Shift the gear lever to the next gear in the order

  5. Release the clutch and continue accelerating


How To Enable:

This feature is enabled on all OTS Maps

The vehicle will need to meet the following conditions for the ECU to allow it to happen.


Available Adjustments and How to Make them:

Adjustments are available on the Accessport directly.

  1. Naviagate to the Tune menu


  2. Select Adjustments


  3. Select Flat Foot Shift Rev Limit

    screenshot1-20240304-210144.png


  4. Set a target RPM between 3000-8000 rpm

    screenshot3.png

  5. Hit the center button to save, then go give it a try! (in a safe responsibe manner)


Flat Foot Shift Monitors

1

FFS Disabled

2

Vehicle Speed Ready

4

Accel. Pedal Ready

8

Clutch Pedal Ready

16

Not Used

32

Not Used

64

Real Time Override

128

FFS Active


Things To Look Out For:

WARNING - THESE FEATURES ARE ABUSIVE TO THE ENGINE, CLUTCH, TRANSMISSION, AXLES, TIRES, AND DIFFERENTIAL.  THE USER ACCEPTS ALL RISKS AND RESPONSIBILITIES WHEN USING THIS FEATURE

Related Articles: