Supported Vehicles

Map Revisions:

  • 911 Turbo

  • Stage0 v102

  • Stage1 v102

Required Accessport Firmware

Map Availability:

All maps come pre-installed on the Accessport. Download maps via the COBB Tuning Porsche Map Database



Fuel Requirements:

Each map lists the minimum required octane. A higher octane fuel can be used safely on a map designed for lower octane. DO NOT use maps designed for higher octane with lower octane fuels. Top Tier gasoline should be used where available.

Running 0% Ethanol Fuels

These maps are designed for E10 fuel (fuel with 10% ethanol content). For those who only have access to E0 fuel (fuel with 0% ethanol) it is recommended to use the "91" and "ACN91" octane versions of the maps and datalog the car to ensure your fuel is performing to the necessary level. This is especially important for those using Canadian 94 octane E0 fuel. 


Peak Increase refers to the point where the value is the highest throughout the run

Average HP/TQ refers to the average value present over the entire RPM range

Turbo Power Output

Stage1 91 (95 RON) Hard Parts Requirements

Stage1 93 (98 RON) Hard Parts Requirements


Closing Warnings and Precautions:



Version

Notes

v102

Initial Release