Supported Vehicles


Map Revisions:

S4 & S5

  • Stage0 v101

  • Stage1 v101

Required Accessport Firmware

Map Availability:

All maps come pre-installed on the Accessport. Download maps via the 


Fuel Requirements:

Each map lists the minimum required octane. A higher octane fuel can be used safely on a map designed for lower octane. DO NOT use maps designed for higher octane with lower octane fuels. Top Tier gasoline should be used where available.

Running 0% Ethanol Fuels

These maps are designed for E10 fuel (fuel with 10% ethanol content). For those who only have access to E0 fuel (fuel with 0% ethanol) it is recommended to use the "91" and "ACN91" octane versions of the maps and datalog the car to ensure your fuel is performing to the necessary level. This is especially important for those using Canadian 94 octane E0 fuel. 


Peak Increase compares the highest value present for each run regardless of RPM

Max HP/TQ is the largest difference when comparing stock vs tuned at a single RPM point

Average HP/TQ refers to the average value present over the entire RPM range

Power Output

Stage1 Hard Parts Requirements

Non-Performance Maps

Stage0

A map with stock calibration for diagnostic use

Flashing to the Stage0 map is not the same as uninstalling from the vehicle


Closing Warnings and Precautions:


Version

Notes

v101

Update to resolve bug with reduced torque on one ROM

v100

Initial Release