2010-2013 Porsche 997.2 911 Turbo w / PDK Transmission
2010-2013 Porsche 997.2 911 Turbo S w/ PDK Transmission
2012-2016 Porsche 911.1 NA Carrera (Base, S, GTS) w/ PDK Transmission
2014-2016 Porsche 911 Turbo and Turbo S w/ PDK Transmission
2009-2012 Porsche 987.2 Cayman S w/ PDK Transmission
2012 Porsche 987.2 Cayman R w/ PDK Transmission
2009-2012 Porsche 987.2 Boxster S w/ PDK Transmission
2012 Porsche 987.2 Boxster Spyder w/ PDK Transmission
2009-2012 Porsche 997.2 Carrera S w/ PDK Transmission
2009-2012 Porsche 997.2 Carrera 4 S w/ PDK Transmission
2011-2012 Porsche 997.2 Carrera GTS w/ PDK Transmission
2011-2012 Porsche 997.2 Carrera 4 GTS w/ PDK Transmission
AP3-POR-013
A clutch re-learn performed when the PDK Transmission is not up to temperature (140F/60C) could cause incorrect learning points. The Clutch Re-Learn process will take 8-12 minutes (some cars may take longer), so be sure you are ready to keep your foot on the brake for the allotted time.
DO NOT BE ALARMED* The Clutch Re-Learn Process will require movement by the clutches in the vehicle. It is normal to hear noises and feel clunking during the Re-Learn time period.
Warning: Please make sure your PDK Transmission is at operating temperature (140F/60C) before performing the Clutch Re-Learn. The vehicle ignition must be "ON" motor running and PDK Transmission put into "P" park. |
Start up your car and let the engine temperatures reach at least 176F/80C and transmission temperatures reach 140F/60C. A short drive may be needed to bring your temps up to the minimum needed if you are starting off with a cold motor.
Go to the "Troubleshooting" menu.
Select "PDK Service."
Select "PDK Relearn."
A series of prompts will appear that ask to make sure car is at operating temperature. Select "Continue" to proceed if the car meets these conditions. If these conditions are not met and you continue anyways, the Re-Learn will fail and you will need to repeat this process once the transmission and engine are at the appropriate temperature.
PDK relearn will begin. The process will take several minutes to complete (some vehicles may be around 15 or 20 minutes).
Verify that you leave your foot on the brake during this entire time. DO NOT BE ALARMED* The Clutch Re-Learn Process will require movement by the clutches in the vehicle. It will be totally normal to hear noises and feel clunking during the Re-Learn time period, the engine rpms may also move around. |