CB-1225 – COBB VA WRX, STI Front Sway Bar Endlinks
2007 - 2011 Subaru Impreza WRX, WRX STI
2015 - 2021 Subaru WRX, WRX STI
Congratulations on your purchase of the COBB Tuning Rear sway bar endlinks! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
|
Use a 17mm wrench to undo the nut while using a m6 allen wrench to hold the center of the endlink and keep it from spinning. Break each side loose first (sway bar and control arm) and then remove the nut completely. Repeat with the other side.