CB-099FZ-26 – COBB 26mm VA WRX STI Front Sway Bar
2015 - 2021 Subaru WRX STI
Congratulations on your purchase of the COBB Tuning Rear sway bar! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
Either way it's best to start with loosening the sway bar from the control arms so you don't have to worry about holding it up. Use a 17mm wrench to undo the nut while using a m6 allen wrench to hold the center of the endlink and keep it from spinning.