Congratulations on your purchase of the COBB Tuning Ford Raptor SF Intake! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
IMPORTANT! Installing this kit will require custom tuning or utilizing an appropriate Stage Power Package map if you have a matching mechanical configuration. Please consult with COBB or an authorized ProTuner in your area if you have any questions!
Left and Right refer to their position based on sitting in the driver's seat looking forward. |
Install the factory breather lines and bypass valve recirculation tube, these are fairly straightforward as the sizes are different so it will only fit in one spot. Some of them may require turning the coupler or shifting some of the zip ties/tie downs that hold them together back along their length. Make sure they are loose and free to move, they use hard plastic in the end fittings and if they're tight they may break when stressed repeatedly while driving.
OPTIONAL: |
Customer Support
COBB Tuning Customer Support Center
Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)
866.922.3059