793150 - Ford Focus RS & ST Carbon Fiber Redline Intake
Focus ST 2013-2018
Focus RS 2016-2018
792150 - Focus ST Cold Air Intake
Focus ST 2013-2018
Congratulations on your purchase of the COBB Tuning Focus RS Carbon Fiber Intake System! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
Aluminum Intake installers can reinstall the factory airbox lid.
|
The installed intake pipe will be connected as such:
There are two different reducers included with the carbon intake. The shorter one will be used if installing the intake onto a Focus RS and the long one will be used for the Focus ST. If you're installing the aluminum intake you will only have one coupler for your focus ST since the intake doesn't fit the Focus RS
(Where Applicable)
Apply the supplied CARB sticker in a clear, easy to find location. Typically underhood, or on the radiator core support.
COBB Product Install Instructions for Focus ST
Main Installation Instruction Repository for Focus ST Parts
Link to Focus ST Map Notes to see what map you should be on given the parts you've added