941800 - Outback XT Lift Kit
2020 Outback XT
[placeholder]
Congratulations on your purchase of the COBB Tuning Outback XT Lift Kit! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
Some sort of warning about needing an alignment |
It's best to do one side at a time to avoid getting things swapped to the wrong side or set up incorrectly. |
Once again having your BFF hold the strut from underneath, use your 14mm socket remove the two top nuts for the strut and drop it out of the car.
Make sure to keep track of which side is right and left. While the rear struts are technically the same, over time the bushings will deflect in one direction or the other making it much more difficult to install them on the incorrect side. |