725350 - Subaru Redline Carbon Fiber Intake
Subaru WRX STI 2015 - 2021
Subaru WRX STi S209-2019
Subaru WRX STi Type RA-2018
Congratulations on your purchase of the COBB Tuning STI Redline Intake! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
You're all done! Go out and Enjoy!
If you want slightly more noise from the intake / bypass valve You'll want to leave the vent open (at the expense of some hot air from the engine bay going into the intake). If you want all of the air to come from the snorkel at the front you'll want to leave the panel in place.
(Where Applicable)