Supported Vehicles:
- 2007-2009 Porsche 911 (997.1) Turbo WM
- 2008-2009 Porsche 911 (997.1) GT2 WM
Map Revision:
- Stage1 v103
- Stage2 v103
- Stage3 1000 v103
- Stage3 1300 v103
- Stage0 v103
- Valet Map v103
- Anti-Theft v103
Required Accessport Firmware:
- AP3-POR-001: 1.7.2.0-10956 or greater
Map Availability:
- Download from the COBB Tuning Porsche Map Database
Map Version Notes:
Note: Chrono Sport/Overboost mode - Is a Porsche option that increases boost for a short time period. The GT2 does not come with Sport mode and will not have the overboost function that the normal 997.1 Turbos have.
- Stage1
- Exhaust Requirements: Stock
- Intake Requirements: Stock air box with stock air filter
- Boost Targets: 16psi on Normal Mode 18psi on Sport Mode (+/-1 PSI)
- Stage2
- Exhaust Requirements: After-Market Exhaust System
- High Flow Exhaust (larger diameter piping)
- High flow catalytic converters.
- Intake Requirements: Stock airbox with stock air filter or upgraded panel filter.
- Boost Targets: 17psi on normal mode, 20psi on Sport mode. (+/-1 PSI)
- Exhaust Requirements: After-Market Exhaust System
- Stage3
- *Stage 3 Maps are available here via Cobb Tuning's Website.
- Exhaust Requirements: After-Market Exhaust System
- High Flow Exhaust (larger diameter piping)
- High flow catalytic converters.
- Intake Requirements: Stock airbox with stock air filter or upgraded panel filter.
- Cobb 1000cc Injectors (Discontinued)
- Use Stage3 1000 ... v103 maps.
- Cobb 1300cc Injectors
- Use Stage3 1300 ... v103 maps.
- Upgraded Intercoolers
Notes: Stage1, Stage2, and Stage3 OTS maps have brake boosting enabled for 2 seconds. You will be able to floor the gas with your foot on the brake to build boost. The timer for the sport button has also been raised to 30 seconds so that you can enjoy the overboost feature for longer. The additions of any other hardware may cause the vehicle to perform poorly. If you experience any issues at all please contact our Porsche Expert Group at Porsche.Experts@Cobbtuning.com.
- Non Performance Maps
- Valet Mode
- Rev limiter set to 4000 RPM. Not for use with Stage3. Boost lowered to half of normal.
- Anti-Theft Mode
- This map will not allow the vehicle to start.
- Stage 0
- Stock calibration. No changes made at all.
- Stock calibration. No changes made at all.
- Valet Mode
Closing Warnings and Precautions:
- Use of inappropriate calibration/modification combinations will promote engine damage
- Seek the help of a professional COBB Protuner should your Porsche Turbo fall outside of OTS map requirements.
- Top Tier gasoline should be used when available. Use of lower quality fuels can result in catastrophic engine damage.
- For track events, we recommend adding at least 2 gallons of 100 octane fuel to battle high track temperatures.
If using E85 it is your responsibility to ensure you are getting the proper mixture from your station. Many stations change to an E70 blend in the winter.
Revision Notes:
V103:
- Updated maps to add factory fuel PID oscillation issue to all Stage3 B742 maps as well as Stage1 & Stage2 B742 maps that were fixed in V102. All 997.1 Turbo maps updated to V103 for conformity, but only B742 Stage3 maps have been modified.
V102:
- Updated maps to correct a factory fuel PID oscillation issue unique to B742 ROMS. All 997.1 Turbo maps updated to v102 for conformity, but B721, B730, B740, B821, and B830 maps are unchanged from V101.
V101:
- Improved map stability and map maintenance update for future feature support. Initial launch of Stage3 Maps located on our website. www.COBBTuning.com
V100:
- Adjusted load correction, load and torque limits, raised vehicle rev limits, raised vehicle speed limits, brake boosting enabled for 2 seconds. Also increased boost in both normal and sport modes. Made fueling changes as well as timing changes and raised the timer for sport mode to 30 seconds.
B721, B730, B740, B742 are the operating system for the 997.1 Turbo, B821 and B830 are the operating system for the 997.1 GT2. These can be found as the first 4 values of your ROM ID. The ROM ID can be found on the AP under Help → About Accessport → Installed Vehicle. Or in Accessport Manager under the AP Info Tab.