Part Number - Part Name

Vehicle Coverage

Congratulations on your purchase of the COBB Tuning xxxxxxxxxxxxxx! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.

Parts List

Tools Needed

Sockets

3/8"

3/8" ratchet
3/8" 12" extension
3/8" 6" extension
3/8" Socket Swivel
3/8" 7mm socket
3/8" 8mm socket
3/8" 10mm socket
3/8" 11mm socket
3/8" 12mm socket
3/8" 13mm socket
3/8" 14mm socket
3/8" 15mm socket
3/8" 16mm socket
3/8" 17mm socket
3/8" 18mm socket
3/8" 19mm socket
3/8" 21mm socket
3/8" 10mm deep socket
3/8" 12mm deep socket
3/8" 13mm deep socket
3/8" 14mm deep socket
3/8" 15mm deep socket
3/8" 17mm deep socket
3/8" 14mm swivel socket
3/8" T20 Torx Bit
3/8" T25 Torx Bit
3/8" T30 Torx Bit
3/8" T40 Torx Bit
3/8" T50 Torx Bit
3/8" E10 inverted Torx
3/8" E12 inverted Torx
3/8" E14 inverted Torx
3/8" E18 inverted Torx
3/8" 4mm Allen Socket
3/8" 5 mm Allen Socket
3/8" 10 mm Allen Socket

1/2"

1/2" ratchet
1/2" breaker bar*
1/2" 16" extension*
1/2" 14mm socket*
1/2" 23mm deep socket
Torque Wrench

Hand Tools

Phillips head screwdriver
Flathead screwdriver
3mm Allen Key
7mm Nut Driver
Trim removal tool
Pick
Needlenose pliers
Channel Lock Pliers
Deadblow Hammer

Misc.

14mm offset wrench
Oxygen Sensor Wrench
Hose cutter
Drain pan
Spill-Free coolant bleeding funnel

Wrenches

8mm Ratcheting combination wrench
10mm combination wrench
11mm combination wrench
12mm combination wrench
13mm combination wrench
14mm combination wrench
15mm combination wrench
16mm combination wrench
17mm combination wrench
18mm combination wrench
19mm combination wrench
21mm combination wrench

Gateway and Ethanol Sensor Mounting

Park your car in a flat level area.
With your car running, remove the fuel pump fuse and leave the car idling until it dies (this may take a while.) This should depressurize the fuel system to minimize the amount of fuel spilled.
On the passenger’s side of the engine bay Locate the fuel line underneath the strange aluminum AC line loop. It should have a black retaining clip over the line.
On the end towards the front of the car,gently spread out the curved legs of the clip, this should release it from the fitting on the fuel line, and then it can be removed from the car.
Using your fingers or a flat bladed screwdriver, pull out the flat center portion of the blue clip to release the soft fuel line.
Repeat this process at the other end of the fuel line near the intake manifold.
Squeeze the tabs of the fuel line retainingbracket soit can be removed from the car.