800620 – COBB 1.1 Bar Radiator Cap
Vehicle Coverage
[placeholder]
Congratulations on your purchase of the COBB Tuning 1.1 Bar Radiator Cap! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
IMPORTANT! Installing this kit will require custom tuning or utilizing an appropriate Stage Power Package map if you have a matching mechanical configuration. Please consult with COBB or an authorized ProTuner in your area if you have any questions!
Table of Contents
Parts List
- XLE BPV
- Loctite 545 pipe thread sealant
- (3) feet of 6mm vacuum hose
- Barb fitting
- (2) Hex plug
- Allen key
Tools Needed
Section 1
Section 2
Section 3
Section 4
Section 5
Links
MAP Notes
Helps to figure out which map you should be on given the parts installed to your car
Links for related parts
Customer Support
Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)
866.922.3059