Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Supported Vehicles

  • 2019-2022 USDM Porsche Cayenne S (9Y0)

Map Revisions:

Porsche Cayenne S

  • Stage0 v100

  • Stage1 v100

Required Accessport Firmware

  •  AP3-POR-01

Map Availability:

All maps come pre-installed on the Accessport. Download maps via the COBB Tuning Porsche Map Database



Fuel Requirements:

Each map lists the minimum required octane. A higher octane fuel can be used safely on a map designed for lower octane. DO NOT use maps designed for higher octane with lower octane fuels. Top Tier gasoline should be used where available.

  • Maps designated with "91 OCT or 95 RON " are for use with 91 and 92 octane/95 RON fuel or better.

  • Maps designated with "93 OCT or 98 RON" are for use with 93 octane/98 RON fuel or better.

Running 0% Ethanol Fuels

These maps are designed for E10 fuel (fuel with 10% ethanol content). For those who only have access to E0 fuel (fuel with 0% ethanol) it is recommended to use the "91" and "ACN91" octane versions of the maps and datalog the car to ensure your fuel is performing to the necessary level. This is especially important for those using Canadian 94 octane E0 fuel. 


Peak Increase refers to the point where the value is the highest throughout the run

Average HP/TQ refers to the average value present over the entire RPM range

Cayenne S Power Output

This vehicle requires a minimum octane of 93 from the factory. We found significant timing corrections occurred on the stock tune when running 91 octane gas. The Stage1 91 map offers reasonable performance while minimizing engine knock to allow safe operation when 93 octane isn’t available.

Stage1 91 (95 RON)

Stage1 91

Peak HP Increase

+.53% HP

 Values

408.94 hp @ 6220 RPM vs 406.96 hp @ 6220 RPM

Peak TQ Increase

-2.95% TQ

 Values

417.97 ft-lb @ 3560 RPM vs 430.67 ft-lb @ 3190 RPM

Max HP Increase

+.53% HP

 Values

287.67 vs 267.14 @ 3650 RPM

Max TQ Increase

7.92% TQ

 Values

417.32 vs 386.7 @ 3660 RPM

Average HP

  • Stock 287.36 HP

  • Tuned 284.33 HP

Average TQ

  • Stock 366.91 ft-lb

  • Tuned 364.18 ft-lb

Stage1 91 (95 RON) Hard Parts Requirements

  • Exhaust Requirements: Stock or upgraded catback exhaust.

  • Intake Requirements: Stock air box and filter

  • Intercooler Requirements: Stock


Stage1 93 (98 RON)

Stage1 93

Peak HP Increase

+4.08% HP

 Values

423.8 hp @ 6240 RPM vs 407.2 hp @ 6240 RPM

Peak TQ Increase

+3.07% TQ

 Values

443.89 ft-lb @ 3670 RPM vs 430.67 ft-lb @ 3190 RPM

Max HP

+14.53% HP

 Values

308.28 vs 269.18 @ 3680 RPM

Max TQ

+14.81% TQ

 Values

443.89 vs 386.63 @ 3680 RPM

Average HP

  • Stock 287.36 hp

  • Torque 381.51 hp

Average TQ

  • Stock 287.36 ft-lb

  • Torque 298.92 ft-lb

Stage1 93 (98 RON) Hard Parts Requirements

  • Exhaust Requirements: Stock or upgraded catback exhaust.

  • Intake Requirements: Stock air box and filter

  • Intercooler Requirements: Stock


Closing Warnings and Precautions:

  • Use of inappropriate calibration/modification combinations will promote engine damage.

  • Seek the help of a professional COBB Protuner should your Porsche fall outside of OTS map requirements.

    Top Tier gasoline should be used where available. Use of lower quality fuels can result in catastrophic engine damage.

  • For track events, we recommend adding at least 2 gallons of 100 octane fuel to battle high track temperatures.



Version

Notes

v100

Initial Release


Contact Us:

Contact Us:

COBB Customer Support

Web Support and Tech Articles: COBB Tuning Customer Support Center

Email: support@cobbtuning.com

Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)

866.922.3059


return to www.cobbtuning.com

  • No labels