Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Supported Vehicles

  • 2022 USDM Porsche Macan S (95B.3)

Map Revisions:

Porsche Macan S

  • Stage0 v100

  • Stage1 v100

Required Accessport Firmware

  •  AP3-POR-014: 1.7.4.2-21010 or greater

Map Availability:

All maps come pre-installed on the Accessport. Download maps via the COBB Tuning Porsche Map Database



Fuel Requirements:

Each map lists the minimum required octane. A higher octane fuel can be used safely on a map designed for lower octane. DO NOT use maps designed for higher octane with lower octane fuels. Top Tier gasoline should be used where available.

  • Maps designated with "ACN91 OCT or 93 RON" are for use with 91 octane fuel found in Arizona, California, and Nevada, Canadian 94 Octane and 94 Octane with 0% ethanol, 93 RON fuel or better.

    Maps designated with "91 OCT or 95 RON " are for use with 91 and 92 octane/95 RON fuel or better.

  • Maps designated with "93 OCT or 98 RON" are for use with 93 octane/98 RON fuel or better.

    • 94 octane with 0% Ethanol should run the ACN91 Map.

  • Maps designated with "100 OCT or 102 RON" are for use with 100 octane/102 RON fuel or better.

Running 0% Ethanol Fuels

These maps are designed for E10 fuel (fuel with 10% ethanol content). For those who only have access to E0 fuel (fuel with 0% ethanol) it is recommended to use the "91" and "ACN91" octane versions of the maps and datalog the car to ensure your fuel is performing to the necessary level. This is especially important for those using Canadian 94 octane E0 fuel. 


Peak Increase refers to the point where the value is the highest throughout the run

Max Gains refer to the area of the run in which the vehicle had the largest value increase over stock.

Macan S Power Output

Stage1 91

Peak HP Increase

+14.78% HP

 Values

412.31hp @ 6107 rpm vs 359.21hp @ 5277rpm

Peak TQ Increase

+10.19% TQ

 Values

436.26ft-lb @ 4247rpm vs 395.92 ft-lb @ 3987rpm

Average HP

  • Stock 279.9hp

  • Tuned 347.76hp

Average TQ

  • Stock 347.76 ft-lb

  • Tuned 386.24 ft-lb

Stage1 91 Hard Parts Requirements

  • Exhaust Requirements: Stock or upgraded catback exhaust.

  • Intake Requirements: Stock air box with stock or COBB High Flow Air Filter.

  • Intercooler Requirements: Stock


Stage1 93

Peak HP Increase

+15.33% HP

 Values

414.29hp @ 6107 rpm vs 359.21 hp @ 5277 rpm

Peak TQ Increase

+13.90% TQ

 Values

450.97 ft-lb @ 3297 rpm vs 395.92 ft-lb @ 3987 rpm

Average HP

  • Stock 279.9 hp

  • Tuned 320.6 hp

Average TQ

  • Stock 347.76 ft-lb

  • Tuned 395.48 ft-lb

Stage1 93 Hard Parts Requirements

  • Exhaust Requirements: Stock or upgraded catback exhaust.

  • Intake Requirements: Stock air box with stock or COBB High Flow Air Filter.

  • Intercooler Requirements: Stock


Closing Warnings and Precautions:

  • Use of inappropriate calibration/modification combinations will promote engine damage.

  • Seek the help of a professional COBB Protuner should your Porsche fall outside of OTS map requirements.

    Top Tier gasoline should be used where available. Use of lower quality fuels can result in catastrophic engine damage.

  • For track events, we recommend adding at least 2 gallons of 100 octane fuel to battle high track temperatures.



Version

Notes

v100

Initial Release


Contact Us:

Contact Us:

COBB Customer Support

Web Support and Tech Articles: COBB Tuning Customer Support Center

Email: support@cobbtuning.com

Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)

866.922.3059


return to www.cobbtuning.com

  • No labels