Part Number – Part Name
Subaru WRX 2015 - 2020
[placeholder]
Congratulations on your purchase of the COBB Tuning VA WRX Top Mount Intercooler! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
Table of Contents
Parts List
- COBB TMIC Core Assembly
- COBB Thrust Tunnel Back Assembly
- COBB Thrust Tunnel Side Panels
- DIT WRX Bracket Mount
- DIT WRX Power Steering Computer Relocation Bracket
- Silicone TMIC Coupler
- 2.75" - 2.5" Coupler
- (2) Prothane Bushings
- (1) Bushing Insert Pin
- 3' Rubber Flap Seal
- 842400-HW Hardware Kit
- M12 x 1.75mm nylon lock not
- M12 x 70mm Hex Head Bolt
- (15) SS Black Oxide Button Head Bolt
- (2) Flanged Hex Nut 6mm
- (2) #44 Hose Clamps
Tools Needed
Sockets
3/8"
Hand Tools
Wrenches
Section 1
Section 2
Section 3
Section 4
Section 5
Links
MAP Notes
Helps to figure out which map you should be on given the parts installed to your car
Links for related parts
COBB Customer Support Web Support and Tech Articles: COBB Tuning Customer Support Center Email: support@cobbtuning.com Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST) 866.922.3059 return to www.cobbtuning.comContact Us: