Supported Vehicles:
- 2014-2016 Porsche 911 (991.1) Turbo PDK WM
- 2014-2016 Porsche 911 (991.1) Turbo S PDK WM
Map Revision:
- Stage0 v200
- Stage1 v200
Stage2 v200
Stage3 v200
Required Accessport Firmware:
- AP3-POR-006: 1.7.3.0-15013 or greater
Map Availability:
- Download from the COBB Tuning Porsche Map Database
PDK Map Notes Location:
Note | ||||||
---|---|---|---|---|---|---|
SBR(Stock Boost Response) vs. ABR(Aggressive Boost Response)
|
Non Performance Maps
Stage 0
- Stock calibration. Factory map that the car was delivered from Porsche with. Does not uninstall Accessport.
Closing Warnings and Precautions:
- Use of inappropriate calibration/modification combinations will promote engine damage
- Seek the help of a professional COBB Protuner should your Porsche Turbo fall outside of OTS map requirements.
- Top Tier gasoline should be used where available. Use of lower quality fuels can result in catastrophic engine damage.
For track events, we recommend adding at least 2 gallons of 100 octane fuel to battle high track temperatures.
Revision Notes:
Map Version | Note: |
---|---|
v200 | Compatibility update for use with v201 and higher PDK maps (PDK Map Notes). |
v102 | Added SBR(Stock Boost Response) and ABR(Aggressive Boost Response) maps. ABR maps are very similar to our initial release V101 maps. The new SBR maps have stock like boost response at partial throttle. |
v101 | Initial Release Calibration. Adjusted boost pressure targets airflow targets, ignition timing, RPM limits, vehicle Speed limits as well as other tables that help maintain drivability and increase performance all while maintaining reliability. |