Supported Vehicles:
- USDM 2017-2020 F-150 Raptor SuperCab / SuperCrew
Current Available 10R80 Transmission Maps:
2017-2020 USDM Raptor: |
---|
|
Required Accessport AP-FOR-005 Firmware:
- AP3-FOR-005: 1.7.3.0-19470
TCM Tuning Activation:
- If you did not initially purchase your Accessport with TCM support, please contact the COBB Tuning customer service team via phone or email to activate this feature.
Warning | ||
---|---|---|
| ||
COBB's performance transmission maps have focused 'Normal' and 'Sport' drive modes for performance driving and have not been optimized for towing. Always switch the vehicle's drive mode to 'Tow' mode when hauling a trailer. |
Map Availability:
Download from the COBB Tuning Map Database
All of our OTS TCM maps for ’17-’20 Raptors have been configured to use a factory transmission calibration from a ’19-'20 Raptor as a base. Ford has spent considerable time and effort to improve the operation of the 10R80, and we have chosen to inherit those changes as the foundation for our performance tunes. You can expect the notoriously harsh ‘Sport’ mode 4-5 shift to be fixed on all maps!
Map Notes:
Simulated Stock: this is a stock transmission calibration from a ’19-'20 Raptor; this is true even if the Accessport is installed to a ’17 or ’18 Raptor.
COBB OEM+: this map is intended to be a sporty but refined improvement on the stock transmission behavior.
- Shift Points: skip-shifting in ‘Normal’ drive mode has been maintained; moderately increased shift points for sportier acceleration; more responsive downshift schedules; more anticipatory coastdown (off-power) shift schedules.
- Shift Firmness: moderately increased shift firmness during high-power, high-RPM shifts in ‘Normal’ and ‘Sport’ drive modes.
- Upshift Backout: upshift inhibit (zero APP gear-holding) in ‘Sport’ mode following high-power acceleration and throttle backout has been disabled. Stock behavior would inhibit upshift until pedal position is re-applied above ~10%.
- Torque Limits: increased torque limits for more aggressive launches and acceleration.
COBB Sport: this map is intended to be a performance-first improvement on the stock transmission behavior.
- Shift Points: skip-shifting in ‘Normal’ mode has been eliminated, except for light throttle 1-3 shifts for comfort; increased shift points for livelier acceleration; more responsive downshift schedules; more anticipatory coastdown (off-power) shift schedules.
- Shift Firmness: increased shift firmness during moderate to high-power shifts in ‘Normal’ and ‘Sport’ drive modes.
- Upshift Backout: upshift inhibit (zero APP gear-holding) in ‘Sport’ mode following high-power acceleration and throttle backout has been disabled. Stock behavior would inhibit upshift until pedal position is re-applied above ~10%.
- Torque Limits: increased torque limits for more aggressive launches and acceleration.
Upshift Schedule Graphs:
The factory ECU uses transmission Output Shaft Speed (OSS) for shift schedule tables, along with Accelerator Pedal Position (APP). One graph will plot this data (APP vs. OSS), and the other will show APP vs. Vehicle Speed (which assumes stock tire size and diff. gearing).
Simulated Stock: Normal Drive Mode
COBB OEM+: Normal Drive Mode
COBB Sport: Normal Drive Mode
Closing Warnings and Precautions:
- Tuning is not a replacement for maintenance. Make sure to follow recommended service procedure intervals.
Revision History:
Performance Maps
- v101: added support for 2020 Raptor TCM; modified shifting behavior under inferred gradient conditions
- v100: initial release of 2017-2019 Raptor TCM support