The reference tables are used as a benchmark of the optimal timing assuming optimal conditions and no octane limitation.
The reference tables have additional correction tables (which appear to be identical to the correction tables available for the base tables).
Image Modified
Image Modified
The final result of the base ignition timing value after corrections is subtracted from the final result of the reference ignition timing calculations to form IGA_DIF
That IGA_DIF value gets translated here into an ignition efficiency value here. The x-data and y-data here are swapped due to the way we extract data from a2ls currently.
Image Modified
The output of these tables is the value we get for the monitor Ignition Torque SP Efficiency Vlft High/Low.
Ignition Torque SP Efficiency Vlft High/Lowis then multiplied by the value from theReference Indicated Torque map.
Image Modified
The system is intended to correct the reported torque value so that it is an accurate representation of the torque output from the motor, but can clearly cause some issues when calibration values start to differ by a larger amount.
