Removal of Stock Intake and Airbox
- Remove the (2) plastic retainers that hold down the intake snorkel using a flat head screwdriver.
Image Modified Image Modified Image Modified
- Remove the intake snorkel from the engine bay.
Image Modified
- Remove the (2) Phillips head screws holding down the MAF sensor using a Phillips head screwdriver.
Image Modified Image Modified Image Modified
- Gently remove the MAF sensor and unclip the MAF sensor harness then set the sensor somewhere safe.
Image Modified Image Modified
- Release the vacuum hoses from the clips on the intake elbow.
Image Modified Image Modified
- Loosen the (2) hose clamps on the intake elbow.
Image Modified
- Remove the 10mm bolt that holds the bottom of the airbox to the chassis using a 10mm socket and 6" extension.
Image Modified Image Modified
- Remove the 10mm nut holding the airbox to the airbox bracket.
Image Modified Image Modified
- Gently lift and remove the airbox, being cautious of the other vacuum hoses in the engine bay.
Image Modified Image Modified Image Modified
|