View Page
Export to Word
Export to PDF
Archive
Version history
View ownership
A
t
tachments (9)
Content Information
View Source
Content
…
COBB Resource Center
COBB Tuning Customer Support Center
Vehicle Specific Troubleshooting & Support
Subaru Vehicles
Maintenance, Updating and Common Issues: Subaru
Subaru Stock Component Removal
GR TMIC Removal
Content Comparison
Versions Compared
Version
Old Version
5
New Version
Current
Changes made by
Brandyn Mowat
Brandyn Mowat
Saved on
Apr 21, 2020
Apr 23, 2020
Previous Change: Difference between versions 4 and 5
View Version History
Key
This line was added.
This line was removed.
Formatting was changed.
...
Excerpt
Note
This removal applies to the following vehicles
2008 - 2014 WRX
2005 - 2009 Legacy GT
2005 - 2009 Outback XT
2008 -
2014
2013
Forester XT
Locate the factory BPV and remove the recirculation hose by squeezing down the hose clamp with your pliers.
Remove the vacuum reference line from the rear port of the BPV
Moving to the other side, unbolt the flange where it meets the turbo using a 12mm socket.
Undo the hose clamp attaching the throttle body coupler to the intercooler. This will typically require a phillips screwdriver, 7 or 8mm socket.
Unbolt the remaining 12mm bolt going to the intercooler support bracket and remove the intercooler from the car.
...
General
Content
Integrations
{"serverDuration": 261, "requestCorrelationId": "1c48aace4303489bb3343378cd3f4af0"}