...

SUBJECT:    Design Change to Engine Wiring Harness

INTRODUCTION

NUMBER:   07-96-15

DATE:   08/10/15

...

resistance. Since this condition develops over time, DTC(s) may set very intermittently with long periods of time between occurrences. A more frequent occurrence of any of these DTC(s) may indicate a different root cause other than the condition described in this bulletin.

Image Modified

PART INFORMATION

NOTE: Although 2012MY Forester models are not equipped with the ELCM, this revised part number information remains applicable.

SERVICE PROCEDURE / INFORMATION

• Always follow the diagnostic procedure in the applicable Service Manual for the DTC(s) being diagnosed. The example DTCs listed in the Introduction section all involve components and sensors located on or near the intake manifold (e.g. intake manifold pressure sensor). They all supply ECM inputs and utilize the referenced common ground point. Any increase in resistance to ground can have significant effect on these sensor outputs to the ECM and cause DTC(s) to
• When replacing the engine wiring harness, the service procedure remains

...