Versions Compared

Old Version 8

changes.mady.by.user Brandyn Mowat

Saved on

compared with

New Version Current

changes.mady.by.user Brandyn Mowat

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Supported Vehicles

  • USDM Civic SISi

    • 2017 - 2020

...

Map Revisions:

Civic SISi

  • Stage0 v100

  • Stage1 v100

Required Accessport Firmware

  • AP3-HON-002: 1.7.5.0-26167

Map Availability:

All maps come pre-installed on the Accessport. They can also be downloaded from the Maps tab on cobbtuning.com

...

Fuel Requirements:

Each map lists the minimum required octane. A higher octane fuel can be used safely on a map designed for lower octane. DO NOT use maps designed for higher octane with lower octane fuels. Top Tier gasoline should be used where available.

...

Info

Peak Increase compares the highest value present for each run regardless of RPM

Max HP/TQ is the largest difference when comparing stock vs tuned at a single RPM point

Average HP/TQ refers to the average value present over the entire RPM range

Power Output

Appsplus tabs lite macro
data{"theme":"COBB Final 3","features":["titles","active","rounded","hover"],"padding":10,"height":700,"tabFont":"Atlassian","tabSize":14,"tabBold":true,"tabItalic":false,"tabUnderline":false,"tabColor":"#000000","tabColorBG":"#e6e6e6","type":"fullWidth","opacity":60,"activeColor":"#000000","activeColorBG":"#e10000","borderWidth":null,"borderColor":"#ebecf0","radius":0,"hoverColor":"#ffffff","hoverColorBG":"#e10000","iconSize":"small","iconInline":true,"iconPrimary":"#ffffff","iconSecondary":"#172b4d","separatorWidth":3,"separatorColor":"#000000","indicatorPercent":5,"indicatorColor":"#ff5630","indicatorColorBG":"#0052cc","hide":false,"vertical":false,"preload":true,"animate":true,"uuid":"GyW1mGAEMo","isNew":false,"loaded":false,"attachmentId":"att3503685654"}
Appsplus tabs lite macro
data{"theme":"gains theme","features":["titles","active","rounded","hover","separator"],"padding":10,"height":560,"tabFont":"Atlassian","tabSize":14,"tabBold":true,"tabItalic":false,"tabUnderline":false,"tabColor":"#000000","tabColorBG":"#e6e6e6","type":"centered","opacity":60,"activeColor":"#000000","activeColorBG":"#e6e6e6","borderWidth":null,"borderColor":"#ebecf0","radius":0,"hoverColor":"#ffffff","hoverColorBG":"#e6e6e6","iconSize":"small","iconInline":true,"iconPrimary":"#ffffff","iconSecondary":"#172b4d","separatorWidth":0,"separatorColor":"#000000","indicatorPercent":5,"indicatorColor":"#ff5630","indicatorColorBG":"#0052cc","hide":true,"vertical":false,"preload":true,"animate":false,"uuid":"cLRTbo_Jj_","isNew":false,"loaded":false,"attachmentId":"att3503095851"}

Stage1 Hard Parts Requirements

  • Exhaust Requirements: Stock or upgraded catback exhaust.

  • Intake Requirements: Stock air box and filter.

  • Intercooler Requirements: Stock

  • Boost Level: 21psi +/- 1psi tapering down to ~18psi as you reach redline.

Non-Performance Maps

Stage0

A map with stock calibration for diagnostic use

Warning

Flashing to the Stage0 map is not the same as uninstalling from the vehicle

...

Closing Warnings and Precautions:

  • Use of inappropriate calibration/modification combinations will promote engine damage.

  • Top Tier gasoline should be used where available. Use of lower quality fuels can result in catastrophic engine damage.

...