Supported Vehicles:

USDM 2017-2020 3.5l Ecoboost F-150

Note
Starting in 2020 the F150 combines the ECU and TCM into one unit, as such you'll flash one map that covers both the transmission and engine maps at the same time. For vehicles from 2017 - 2019 you'll manually select the map for the ECU and TCM individually as they are flashing separate units, if the Accessport has transmission tuning enabled.

2017 - 2019

2017-2019 F-150 3.5L TCM

Map Revision:

COBB OEM+ v100
COBB Sport v100
Simulated Stock v100

2020

2020 F-150 3.5L (combined ECU/TCM)

Map Revision:

Anti-Theft Mode v100
Performance Tow 91 OCT or 95 RON - COBB OEM+ TCM v100
Performance Tow 91 OCT or 95 RON - COBB Sport TCM v100
Performance Tow 91 OCT or 95 RON - COBB Sport TCM v100
Performance Tow 93 OCT or 98 RON - COBB OEM+ TCM v100
Performance Tow 93 OCT or 98 RON - COBB OEM+ TCM v100
Performance Tow 93 OCT or 98 RON - Simulated Stock TCM v100
Stage0 - Simulated Stock TCM v100
Stage1 87 OCT or 91 RON - COBB OEM+ TCM v100
Stage1 87 OCT or 91 RON - COBB Sport TCM v100
Stage1 87 OCT or 91 RON - Simulated Stock TCM v100
Stage1 91 OCT or 95 RON - COBB OEM+ TCM v100
Stage1 91 OCT or 95 RON - COBB Sport TCM v100
Stage1 91 OCT or 95 RON - Simulated Stock TCM v100
Stage1 93 OCT or 98 RON - COBB OEM+ TCM v100
Stage1 93 OCT or 98 RON - COBB Sport TCM v100
Stage1 93 OCT or 98 RON - Simulated Stock TCM v100
Stage2 87 OCT or 91 RON - COBB OEM+ TCM v100
Stage2 87 OCT or 91 RON - COBB Sport TCM v100
Stage2 87 OCT or 91 RON - Simulated Stock TCM v100
Stage2 91 OCT or 95 RON - COBB OEM+ TCM v100
Stage2 91 OCT or 95 RON - COBB Sport TCM v100
Stage2 91 OCT or 95 RON - Simulated Stock TCM v100
Stage2 93 OCT or 98 RON - COBB OEM+ TCM v100
Stage2 93 OCT or 98 RON - COBB Sport TCM v100
Stage2 93 OCT or 98 RON - Simulated Stock TCM v100

Required Accessport AP-FOR-006 or AP-FOR-007 Firmware:

AP3-FOR-006: 1.7.4.0-17673
AP3-FOR-007: 1.7.4.0-17673

TCM Tuning Activation:

If you did not initially purchase your Accessport with TCM support, please contact the COBB Tuning customer service team via phone or email to activate this feature.
- COBB Tuning Contact

Warning

title	Towing

COBB's performance transmission maps have focused 'Normal' and 'Sport' drive modes for performance driving and have not been optimized for towing. Always switch the vehicle's drive mode to 'Tow' mode when hauling a trailer.

Map Availability:

Download from the COBB Tuning Map Database

All COBB F150 Limited TCM maps are built for a stock 10R80 with a stock converter and clutch packs.

Map Notes:

Simulated Stock: this is a stock transmission calibration.

COBB OEM+: this map is intended to be a sporty but refined improvement on the stock transmission behavior.

Shift Points: skip-shifting in ‘Normal’ drive mode has been maintained; moderately increased shift points for sportier acceleration; more responsive downshift schedules; more anticipatory coastdown (off-power) shift schedules.
Shift Firmness: moderately increased shift firmness during high-power, high-RPM shifts in ‘Normal’ and ‘Sport’ drive modes.
Upshift Backout: upshift inhibit (zero APP gear-holding) in ‘Sport’ mode following high-power acceleration and throttle backout has been disabled. Stock behavior would inhibit upshift until pedal position is re-applied above ~10%.
Torque Limits: increased torque limits for more aggressive launches and acceleration.

COBB Sport: this map is intended to be a performance-first improvement on the stock transmission behavior.

Shift Points: skip-shifting in ‘Normal’ mode has been eliminated, except for light throttle 1-3 shifts for comfort; increased shift points for livelier acceleration; more responsive downshift schedules; more anticipatory coastdown (off-power) shift schedules.
Shift Firmness: increased shift firmness during moderate to high-power shifts in ‘Normal’ and ‘Sport’ drive modes.
Upshift Backout: upshift inhibit (zero APP gear-holding) in ‘Sport’ mode following high-power acceleration and throttle backout has been disabled. Stock behavior would inhibit upshift until pedal position is re-applied above ~10%.
Torque Limits: increased torque limits for more aggressive launches and acceleration.

Upshift Schedule Graphs:

The factory ECU uses transmission Output Shaft Speed (OSS) for shift schedule tables, along with Accelerator Pedal Position (APP). One graph will plot this data (APP vs. OSS), and the other will show APP vs. Vehicle Speed (which assumes stock tire size and diff. gearing). Note - plots showing vehicle speed may not align with the shifting behavior of your truck due to differences in factory available final drive ratios.